Silverwater
Epoxy flooring — Before & After
Concrete Resurfacing & Epoxy Flooring in Lidcombe
Real DaniCrete Spray Crete and epoxy flooring projects, with local service coverage across Lidcombe and nearby suburbs.
Lidcombe concrete services
Spray Crete outside. Epoxy flooring inside and on suitable concrete areas.
DaniCrete assesses the existing surface, previous coatings, visible cracking, contamination and intended use before recommending the preparation and coating system. The goal is to match the system to the actual slab rather than apply the same coating to every surface.
Spray Crete — Lidcombe project 1
White-house driveway Before & After
A genuine Before and After pair from the same Lidcombe property. The house, fence, column and driveway layout provide a clear visual match between both stages.
Spray Crete — Lidcombe project 2
Black-brick driveway — Before & After from two views
Two matching views of the same Lidcombe driveway show the concrete before resurfacing and the completed Spray Crete finish.
Epoxy flooring — Lidcombe
Epoxy flake shed floor — genuine Before & After
This Lidcombe shed/garage project shows the older concrete floor before coating and the completed grey-and-white epoxy flake finish in the same timber-framed space.
Additional DaniCrete epoxy examples
Epoxy projects from nearby and wider Sydney
These are shown as additional DaniCrete examples and are not presented as Lidcombe projects unless the suburb is specifically identified.
Gladesville
Epoxy flake driveway — Before & After
Preparation matters
What we assess before resurfacing or coating
Preparation depends on the actual surface and selected system. Existing coatings, contamination, visible cracks, damage and intended use all affect the work required before coating.
- Existing coatings and contamination
- Visible cracks and damaged areas
- Surface preparation requirements
- Area use and exposure
- Finish and coating system selection
Frequently asked questions
What is the difference between Spray Crete and Epoxy Flooring?
Spray Crete is generally used for decorative resurfacing of suitable outdoor concrete. Epoxy flooring is a coating system commonly used on suitable concrete floors such as garages, sheds and selected internal areas.
Can Spray Crete be applied over existing concrete?
Often yes, subject to the condition of the existing concrete and the preparation required. The surface needs to be assessed before the system is selected.
Is epoxy suitable for a garage or shed?
It can be, provided the slab and existing surface are suitable and correctly prepared for the selected epoxy system.
What preparation is done first?
Preparation is project-specific and can include cleaning, removal of weak or incompatible coatings, mechanical preparation and treatment of visible damaged areas before coating.
When can I walk on the finished surface?
For both Spray Crete and epoxy flooring, normal foot traffic can begin once the final topcoat has dried sufficiently for use. Drying and curing depend on the coating system and site conditions, so DaniCrete confirms when the surface is ready.
When can I drive on a newly coated driveway?
Vehicle traffic needs more curing time than foot traffic. The required wait depends on the final coating system, temperature and curing conditions. DaniCrete will confirm when the surface is ready for vehicle traffic for the product used on your project.
Free project enquiry
Tell us about your Lidcombe project
Send your contact details, property address and a short description of the work you need. DaniCrete can then respond about the most relevant service for your surface.